Keysight Technologies InfiniiVision 4000 X Series

216 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
5 Commands Quick Reference
:WAVeform:SOURce:SUBS
ource <subsource>
(see page 1421)
:WAVeform:SOURce:SUBS
ource? (see page 1421)
<subsource> ::= {{SUB0 | RX |
MOSI} | {SUB1 | TX | MISO}}
n/a :WAVeform:TYPE? (see
page 1422)
<return_mode> ::= {NORM | PEAK |
AVER | HRES}
:WAVeform:UNSigned
{{0 | OFF} | {1 |
ON}} (see page 1423)
:WAVeform:UNSigned?
(see page 1423)
{0 | 1}
:WAVeform:VIEW <view>
(see page 1424)
:WAVeform:VIEW? (see
page 1424)
<view> ::= {MAIN | ALL}
n/a :WAVeform:XINCrement?
(see page 1425)
<return_value> ::= x-increment
in the current preamble in NR3
format
n/a :WAVeform:XORigin?
(see page 1426)
<return_value> ::= x-origin
value in the current preamble in
NR3 format
n/a :WAVeform:XREFerence?
(see page 1427)
<return_value> ::= 0
(x-reference value in the current
preamble in NR1 format)
n/a :WAVeform:YINCrement?
(see page 1428)
<return_value> ::= y-increment
value in the current preamble in
NR3 format
n/a :WAVeform:YORigin?
(see page 1429)
<return_value> ::= y-origin in
the current preamble in NR3
format
n/a :WAVeform:YREFerence?
(see page 1430)
<return_value> ::= y-reference
value in the current preamble in
NR1 format
Table 75 :WAVeform Commands Summary (continued)
Command Query Options and Query Returns