518 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
21 :HARDcopy/:HCOPY Commands
:HARDcopy:PALette
(see page 1610)
Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser printers, so
the COLor option is not available when connected to laser printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also • "Introduction to :HARDcopy Commands" on page 504
• ":HARDcopy:STARt" on page 520
• ":HARDcopy:FACTors" on page 508
• ":HARDcopy:LAYout" on page 511
• ":HARDcopy:FFEed" on page 509
• ":HARDcopy:INKSaver" on page 510