Keysight Technologies InfiniiVision 4000 X Series User Manual

504 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
21 :HARDcopy/:HCOPY Commands
Introduction to
:HARDcopy
Commands
The HARDcopy subsystem provides commands to set and query the selection of
hardcopy device and formatting options such as inclusion of instrument settings
(FACTors) and generation of formfeed (FFEed).
:HARDC or :HCOPY are acceptable short forms for :HARDcopy.
Reporting the Setup
Use :HARDcopy? to query setup information for the HARDcopy subsystem.
:HARDcopy:NETWork:DOM
ain <domain> (see
page 514)
:HARDcopy:NETWork:DOM
ain? (see page 514)
<domain> ::= quoted ASCII string
:HARDcopy:NETWork:PAS
Sword <password> (see
page 515)
n/a <password> ::= quoted ASCII
string
:HARDcopy:NETWork:SLO
T <slot> (see
page 516)
:HARDcopy:NETWork:SLO
T? (see page 516)
<slot> ::= {NET0 | NET1}
:HARDcopy:NETWork:USE
Rname <username> (see
page 517)
:HARDcopy:NETWork:USE
Rname? (see page 517)
<username> ::= quoted ASCII
string
:HARDcopy:PALette
<palette> (see
page 518)
:HARDcopy:PALette?
(see page 518)
<palette> ::= {COLor | GRAYscale
| NONE}
n/a :HARDcopy:PRINter:LIS
T? (see page 519)
<list> ::= [<printer_spec>] ...
[printer_spec>]
<printer_spec> ::=
"<index>,<active>,<name>;"
<index> ::= integer index of
printer
<active> ::= {Y | N}
<name> ::= name of printer
:HARDcopy:STARt (see
page 520)
n/a n/a
n/a :HCOPY:SDUMp:DATA?
(see page 521)
<display_data> ::= binary block
data in IEEE-488.2 # format.
:HCOPY:SDUMp:FORMat
<format> (see
page 522)
:HCOPY:SDUMp:FORMat?
(see page 522)
<format> ::= {BMP | BMP8bit |
PNG}
Table 107 :HARDcopy/:HCOPY Commands Summary (continued)
Command Query Options and Query Returns

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English