Keysight Technologies InfiniiVision 4000 X Series User Manual

:HARDcopy/:HCOPY Commands 21
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 515
:HARDcopy:NETWork:PASSword
(see page 1610)
Command Syntax
:HARDcopy:NETWork:PASSword <password>
<password> ::= quoted ASCII string
The :HARDcopy:NETWork:PASSword command sets the password for the
specified Windows network domain and user name.
The password setting is a common setting for both network printer slots.
See Also • "Introduction to :HARDcopy Commands" on page 504
• ":HARDcopy:NETWork:USERname" on page 517
• ":HARDcopy:NETWork:DOMain" on page 514
• ":HARDcopy:NETWork:SLOT" on page 516
• ":HARDcopy:NETWork:APPLy" on page 513
• ":HARDcopy:NETWork:ADDRess" on page 512

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English