Keysight Technologies InfiniiVision 4000 X Series User Manual

516 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
21 :HARDcopy/:HCOPY Commands
:HARDcopy:NETWork:SLOT
(see page 1610)
Command Syntax
:HARDcopy:NETWork:SLOT <slot>
<slot> ::= {NET0 | NET1}
The :HARDcopy:NETWork:SLOT command selects the network printer slot used
for the address and apply commands. There are two network printer slots to
choose from.
Query Syntax
:HARDcopy:NETWork:SLOT?
The :HARDcopy:NETWork:SLOT? query returns the currently selected network
printer slot.
Return Format
<slot><NL>
<slot> ::= {NET0 | NET1}
See Also • "Introduction to :HARDcopy Commands" on page 504
• ":HARDcopy:NETWork:APPLy" on page 513
• ":HARDcopy:NETWork:ADDRess" on page 512
• ":HARDcopy:NETWork:DOMain" on page 514
• ":HARDcopy:NETWork:USERname" on page 517
• ":HARDcopy:NETWork:PASSword" on page 515

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English