:HARDcopy/:HCOPY Commands 21
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 513
:HARDcopy:NETWork:APPLy
(see page 1610)
Command Syntax
:HARDcopy:NETWork:APPLy
The :HARDcopy:NETWork:APPLy command applies the network printer settings
and makes the printer connection.
See Also • "Introduction to :HARDcopy Commands" on page 504
• ":HARDcopy:NETWork:SLOT" on page 516
• ":HARDcopy:NETWork:ADDRess" on page 512
• ":HARDcopy:NETWork:DOMain" on page 514
• ":HARDcopy:NETWork:USERname" on page 517
• ":HARDcopy:NETWork:PASSword" on page 515
To Next Page
Loading...
