Keysight Technologies InfiniiVision 4000 X Series

98 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
5 Commands Quick Reference
n/a *OPT? (see page 241)
(cont'd)
<All field> ::= {0 | All}
<reserved> ::= 0
<MSO> ::= {0 | MSO}
<Memory> ::= {0 | MEMUP}
<Low Speed Serial> ::= {0 | EMBD}
<Automotive Serial> ::= {0 |
AUTO}
<FlexRay Serial> ::= {0 | FLEX}
<Frequency Response Analysis>
::= {0 | FRA}
<Power Measurements> ::= {0 |
PWR}
<RS-232/UART Serial> ::= {0 |
COMP}
<Mask Test> ::= {0 | MASK}
<Bandwidth> ::= {0 | BW20 | BW50}
<I2S Serial> ::= {0 | AUDIO}
<Educator's Kit> ::= {0 | EDK}
<Waveform Generator> ::= {0 |
WAVEGEN}
<MIL-1553/ARINC 429 Serial> ::=
{0 | AERO}
<Extended Video> ::= {0 | VID}
<Digital Voltmeter> ::= {0 | DVM}
<Spectrum Visualizer> ::= {0 |
ASV}
<USB 2.0 Low/Full Speed> ::= {0
| USF}
<USB 2.0 High Speed> ::= {0 |
U2H}
<USB 2.0 Signal Quality Analysis
> ::= {0 | USBSQ}
<Remote Command Logging> ::= {0
| RML}
Table 2 Common (*) Commands Summary (continued)
Command Query Options and Query Returns