Keysight Technologies InfiniiVision 4000 X Series

Commands Quick Reference 5
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 99
n/a *OPT? (see page 241)
(cont'd)
<SENT Serial> ::= {0 | SENSOR}
<CAN FD Serial> ::= {0 | CANFD}
<CXPI Serial> ::= {0 | CXPI}
<NFC Trigger> ::= {0 | NFC}
<Manchester/NRZ Serial> ::= {0 |
NRZ}
<USB PD Serial> ::= {0 | USBPD}
<Automotive Software> ::= {0 |
D4000AUTA}
<General Purpose Software> ::=
{0 | D4000GENA}
<Aerospace Software> ::= {0 |
D4000AERA}
<Power Supply Test Software> ::=
{0 | D4000PWRA}
<USB Test Software> ::= {0 |
D4000USBA}
<Near Field Communications (NFC)
Software> ::= {0 | D4000NFCA}
<Software Bundle> ::= {0 |
D4000BDLA}
*RCL <value> (see
page 243)
n/a <value> ::= {0 | 1 | 4 | 5 | 6 |
7 | 8 | 9}
*RST (see page 244) n/a See *RST (Reset) (see page 244)
*SAV <value> (see
page 247)
n/a <value> ::= {0 | 1 | 4 | 5 | 6 |
7 | 8 | 9}
*SRE <mask> (see
page 248)
*SRE? (see page 249) <mask> ::= sum of all bits that
are set, 0 to 255; an integer in
NR1 format. <mask> ::= following
values:
Bit Weight Name Enables
--- ------ ---- ----------
7 128 OPER Operation Status Reg
6 64 ---- (Not used.)
5 32 ESB Event Status Bit
4 16 MAV Message Available
3 8 ---- (Not used.)
2 4 MSG Message
1 2 USR User
0 1 TRG Trigger
Table 2 Common (*) Commands Summary (continued)
Command Query Options and Query Returns