Alcatel-Lucent OmniSwitch 6250 - Page 1996

OmniSwitch 6250 CLI Reference Guide November 2009 page 2 Session Management Commands
ntp key key [trusted | untrusted]
ntp key load
show ntp client
show ntp client server-list
show ntp server status [ip_address | domain_name]
show ntp keys
Session Management Commands
session login-attempt integer
session login-timeout seconds
session banner {cli | ftp | http} file_name
session banner no {cli | ftp | http}
session timeout {cli | http | ftp} minutes
session prompt default [string]
session xon-xoff {
enable | disable}
prompt [user] [time] [date] [string string] [prefix]
no prompt
show prefix
alias alias command_name
show alias
user profile save
user profile reset
history size number
show history [parameters]
!{! | n}
command-log {enable | disable}
kill session_number
exit
whoami
who
show session config
show session xon-xoff
more size lines
more
no more
show more
telnet {host_name
| ip_address}
ssh {host_name | ip_address | enable | disable}
ssh enforce pubkey-auth {enable | disable}
show ssh config
show command-log
show command-log status
File Management Commands
cd [path]
pwd
mkdir [path/]dir
rmdir [path/]dir
ls [-r] [[path/]dir]
dir [[path/]dir]
rename [path/]old_name [path/]new_name
rm [-r] [path/]filename
delete [path/]filename
cp [-r] [path/]orig_filename [dest_path/]dupl_filename
scp user_name@remote_ip_addr:[path/]source [path/]target
scp [path/]source user_name@remote_ip_addr:[path/]target
mv {[path/]filename dest_path[/new_filename] | [path/]dir dest_path[/new_dir]}
move {[path/]filename dest_path[/new_filename] | [path/]dir dest_path[/new_dir]}
chmod {+w | -w} [path/]file
attrib {+w | -w} [path/]file
freespace [
/flash]
fsck
/flash [no-repair | repair]
newfs /flash
rcp [slot:] source_filepath [slot:] destination_filepath
rrm slot filepath
rls slot directory [file_name]
vi [path/]filename
view [path/]filename
tty lines columns
show tty
more [path/]file
ftp {host_name
| ip_address}
scp-sftp {enable | disable}
show ssh config
tftp {host_name | ip_address} {get | put} source-file [src_path/]src_file
[destination-file [dest_path/] dest_file] [ascii]
rz
Web Management Commands
{[ip] http | https} server
no {[ip] http | https} server
{[ip] http | https} ssl
no {[ip] http | https} ssl
[ip] http port {default | port}
https port {default | port}