Keysight Technologies InfiniiVision 4000 X Series User Manual

204 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
5 Commands Quick Reference
:TRIGger:NREJect {{0
| OFF} | {1 | ON}}
(see page 1309)
:TRIGger:NREJect?
(see page 1309)
{0 | 1}
:TRIGger:SWEep
<sweep> (see
page 1310)
:TRIGger:SWEep? (see
page 1310)
<sweep> ::= {AUTO | NORMal}
Table 62 General :TRIGger Commands Summary (continued)
Command Query Options and Query Returns
Table 63 :TRIGger:DELay Commands Summary
Command Query Options and Query Returns
:TRIGger:DELay:ARM:SL
OPe <slope> (see
page 1312)
:TRIGger:DELay:ARM:SL
OPe? (see page 1312)
<slope> ::= {NEGative | POSitive}
:TRIGger:DELay:ARM:SO
URce <source> (see
page 1313)
:TRIGger:DELay:ARM:SO
URce? (see page 1313)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger:DELay:TDELay
:TIME <time_value>
(see page 1314)
:TRIGger:DELay:TDELay
:TIME? (see page 1314)
<time_value> ::= time in seconds
in NR3 format
:TRIGger:DELay:TRIGge
r:COUNt <count> (see
page 1315)
:TRIGger:DELay:TRIGge
r:COUNt? (see
page 1315)
<count> ::= integer in NR1 format
:TRIGger:DELay:TRIGge
r:SLOPe <slope> (see
page 1316)
:TRIGger:DELay:TRIGge
r:SLOPe? (see
page 1316)
<slope> ::= {NEGative | POSitive}
:TRIGger:DELay:TRIGge
r:SOURce <source>
(see page 1317)
:TRIGger:DELay:TRIGge
r:SOURce? (see
page 1317)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English