Keysight Technologies InfiniiVision 4000 X Series

Root (:) Commands 7
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 269
• Chapter 4, “Sequential (Blocking) vs. Overlapped Commands,” starting on page
91
• "Example: Checking for Armed Status" on page 1581
Example Code
' Capture an acquisition using :DIGitize.
' -----------------------------------------------------------------
myScope.WriteString ":DIGitize CHANnel1"
See complete example programs at: Chapter 44, “Programming Examples,”
starting on page 1619