Keysight Technologies InfiniiVision 4000 X Series

299
Keysight InfiniiVision 4000 X-Series Oscilloscopes
Programmer's Guide
8 :ACQuire Commands
Set the parameters for acquiring and storing data. See "Introduction to :ACQuire
Commands" on page 300.
Table 94 :ACQuire Commands Summary
Command Query Options and Query Returns
n/a :ACQuire:AALias? (see
page 302)
{1 | 0}
:ACQuire:COMPlete
<complete> (see
page 303)
:ACQuire:COMPlete?
(see page 303)
<complete> ::= 100; an integer in
NR1 format
:ACQuire:COUNt
<count> (see page 304)
:ACQuire:COUNt? (see
page 304)
<count> ::= an integer from 2 to
65536 in NR1 format
:ACQuire:DAALias
<mode> (see page 305)
:ACQuire:DAALias?
(see page 305)
<mode> ::= {DISable | AUTO}
:ACQuire:DIGitizer
{{0 | OFF} | {1 |
ON}} (see page 306)
:ACQuire:DIGitizer?
(see page 306)
{0 | 1}
:ACQuire:MODE <mode>
(see page 307)
:ACQuire:MODE? (see
page 307)
<mode> ::= {RTIMe | ETIMe |
SEGMented}
:ACQuire:POINts[:ANAL
og] <points> (see
page 308)
:ACQuire:POINts[:ANAL
og]? (see page 308)
<points> ::= {AUTO |
<points_value>}
<points_value> ::= desired
analog memory depth in integer
NR1 format
:ACQuire:POINts[:ANAL
og]:AUTO {{0 | OFF} |
{1 | ON}} (see
page 309)
:ACQuire:POINts[:ANAL
og]:AUTO? (see
page 309)
{0 | 1}
:ACQuire:RSIGnal
<ref_signal_mode>
(see page 310)
:ACQuire:RSIGnal?
(see page 310)
<ref_signal_mode> ::= {OFF | OUT
| IN}