Keysight Technologies InfiniiVision 4000 X Series

642 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
25 :MEASure Power Commands
:MEASure:CRESt
[<source>] (see
page 649)
:MEASure:CRESt?
[<source>] (see
page 649)
<source> ::= {CHANnel<n>|
FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<return_value> ::= the crest
factor value in NR3 format
:MEASure:EFFiciency
(see page 650)
:MEASure:EFFiciency?
(see page 650)
<return_value> ::= percent value
in NR3 format
:MEASure:ELOSs
[<source>] (see
page 651)
:MEASure:ELOSs?
[<source>] (see
page 651)
<source> ::= {CHANnel<n>|
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= the energy
loss value in NR3 format
:MEASure:FACTor
[<source1>][,<source2
>] (see page 652)
:MEASure:FACTor?
[<source1>][,<source2
>] (see page 652)
<source1>, <source2> ::=
{CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the power
factor value in NR3 format
:MEASure:IPOWer (see
page 653)
:MEASure:IPOWer? (see
page 653)
<return_value> ::= the input
power value in NR3 format
:MEASure:OFFTime
[<source1>][,<source2
>] (see page 654)
:MEASure:OFFTime?
[<source1>][,<source2
>] (see page 654)
<source1>, <source2> ::=
{CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the time in
seconds in NR3 format
Table 111 :MEASure Power Commands Summary (continued)
Command Query Options and Query Returns