Keysight Technologies InfiniiVision 4000 X Series User Manual

What's New 1
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 67
Obsolete
Commands
Discontinued
Commands
Obsolete Command Current Command Equivalent Behavior Differences
:FUNCtion Commands :FUNCtion2 Commands (see
page 455)
:FUNCtion commands (with no
<m> number) map to
:FUNCtion2. This allows legacy
programs to work without
change.
:FUNCtion:GOFT:OPERation
(see page 1508)
:FUNCtion1:OPERation (see
page 490)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce1 (see
page 1509)
:FUNCtion1:SOURce1 (see
page 498)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce2 (see
page 1510)
:FUNCtion1:SOURce2 (see
page 500)
GOFT maps to FUNCtion1.
:SYSTem:MENU (see
page 1545)
:DISPlay:MENU (see
page 420)
No change in behavior.
Discontinued Command Current Command Equivalent Comments
:POWer:SIGNals:CYCLes :POWer:SIGNals:CYCLes:HARM
onics (see page 777)
:POWer:SIGNals:CYCLes:QUALi
ty (see page 778)
This command was separated
into several other commands
for specific types of power
analysis.
:POWer:SIGNals:DURation :POWer:SIGNals:DURation:EFFi
ciency (see page 779)
:POWer:SIGNals:DURation:MO
Dulation (see page 780)
:POWer:SIGNals:DURation:ON
OFf:OFF (see page 781)
:POWer:SIGNals:DURation:ON
OFf:ON (see page 782)
:POWer:SIGNals:DURation:RIP
Ple (see page 783)
:POWer:SIGNals:DURation:TRA
Nsient (see page 784)
This command was separated
into several other commands
for specific types of power
analysis.
:POWer:SIGNals:VMAXimum :POWer:SIGNals:VMAXimum:IN
Rush (see page 787)
:POWer:SIGNals:VMAXimum:O
NOFf:OFF (see page 788)
:POWer:SIGNals:VMAXimum:O
NOFf:ON (see page 789)
This command was separated
into several other commands
for specific types of power
analysis.

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English