Siemens SINAMICS S110 - r4771[0...16383] Trace 1 trace buffer signal 1; Trace 1 trace sig1; r4772[0...16383] Trace 1 trace buffer signal 2; Trace 1 trace sig2; r4773[0...16383] Trace 1 trace buffer signal 3; Trace 1 trace sig3; r4774[0...16383] Trace 1 trace buffer signal 4; Trace 1 trace sig4

List of parameters
Parameter
1-465
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Description: Displays the trace buffer (record buffer) for trace 1 and signal 1.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 2.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 3.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 4.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 5.
Dependency: Refer to: r4760
r4771[0...16383] Trace 1 trace buffer signal 1 / Trace 1 trace sig1
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4772[0...16383] Trace 1 trace buffer signal 2 / Trace 1 trace sig2
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4773[0...16383] Trace 1 trace buffer signal 3 / Trace 1 trace sig3
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4774[0...16383] Trace 1 trace buffer signal 4 / Trace 1 trace sig4
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4775[0...16383] Trace 1 trace buffer signal 5 / Trace 1 trace sig5
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -