Siemens SINAMICS S110 - Fig. 2-53 2496 - CU_ZSW status word, Control Unit interconnection

Function diagrams PROFIdrive 2-810
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Fig. 2-53 2496 – CU_ZSW status word, Control Unit interconnection
- 2496 -
Function diagram
87654321
fp_2496_98_eng.vsd
DO: CU_S110
SINAMICS S110
25.01.10 V04.04.00
PROFIdrive - CU_ZSW1 status word 1 Control Unit interconnection
<1> Used in telegrams 390 and 391.
<2> The ZSW1 is generated using the binector-connector converter (BI: p2080[0...15], inversion: p2088[0].0...p2088[0].15)
Refer to [1020.7]
PROFIdrive sampling time
1 = Alarm present
1 = Fault not present
Reserved
1 = Fault present
1 = Alarm is not present
1 = Safety-Message/signal not present
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
p2081[7] = r2139.7
p2081[8] = r0899.8
Implicitly
interconnected
-
Reserved
1 = System time synchronized
Slave sign-of-life bit 0
Reserved
Reserved
Reserved
Slave sign-of-life bit 1
Slave sign-of-life bit 2
Slave sign-of-life bit 3
CU_ZSW1.1
CU_ZSW1.2
CU_ZSW1.3
CU_ZSW1.4
CU_ZSW1.5
CU_ZSW1.6
CU_ZSW1.8
CU_ZSW1.9
CU_ZSW1.11
CU_ZSW1.12
CU_ZSW1.13
CU_ZSW1.14
CU_ZSW1.15
CU_ZSW1.7
CU_ZSW1.10
---ReservedCU_ZSW1.0
-
-
-
p2081[11] = r3114.11
p2081[10] = r3114.10
p2081[9] = r3114.9
- -
-
p2081[3] = r2139.3
<1>
Signal sources for CU_ZSW1
Inverted
[Function diagram]
signal source
[Function diagram]
Internal status word
Interconnection
parameters
MeaningSignal
<1>
<2>