Siemens SINAMICS S110 - Fig. 2-52 2495 - CU_STW control word, Control Unit interconnection

PROFIdrive
Function diagrams
2-809
© Siemens AG 2012 All Rights Reserved SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Fig. 2-52 2495 – CU_STW control word, Control Unit interconnection
- 2495 -
Function diagram
87654321
fp_2495_98_eng.vsd
DO: CU_S110
SINAMICS S110
24.09.10 V04.04.00
PROFIdrive - CU_STW1 control word Control Unit interconnection
Signal targets for CU_STW1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
p2103[0] = r2090.7
Reserved
= 1. Acknowledge faults
Master sign-of-life bit 0
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Master sign-of-life bit 1
Master sign-of-life bit 2
Master sign-of-life bit 3
CU_STW.1
CU_STW.2
CU_STW.3
CU_STW.4
CU_STW.5
CU_STW.6
CU_STW.8
CU_STW.9
CU_STW.11
CU_STW.12
CU_STW.13
CU_STW.14
CU_STW.15
CU_STW.7
CU_STW.10
---Central measuring probe, synchronizing signal sourceCU_STW.0
Inverted
[Function diagram]
signal target
[Function diagram]
internal control word
Interconnection
parameters
MeaningSignal
-
-
-
-
-
-
- -
p0681[0] = r2090.0
Reserved
p2045 =r2050[3]
-
<1> Used in telegrams 390 and 391.
<1>
Refer to [1020.7]
PROFIdrive sampling time
p3104 = r2090.1
Master control by PLC
RTC real time synchronization PING
p3116 = r2090.10