Siemens SINAMICS S110 - r8512 CO: Data transfer 0 receive wordwise; Trans 0 recv word; r8513 CO: Data transfer 1 receive wordwise; Trans 1 recv word; r8514 CO: Data transfer 2 receive wordwise; Trans 2 recv word; r8515 CO: Data transfer 3 receive wordwise; Trans 3 recv word

Parameter
List of parameters
1-496
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Description: Displays the signals of the wordwise received data (process signal).
This signal value is interconnected and transferred via CI: p8502.
Dependency: Refer to: p8502
Description: Displays the signals of the wordwise received data (process signal).
This signal value is interconnected and transferred via CI: p8503.
Dependency: Refer to: p8503
Description: Displays the signals of the wordwise received data (process signal).
This signal value is interconnected and transferred via CI: p8504.
Dependency: Refer to: p8504
Description: Displays the signals of the wordwise received data (process signal).
This signal value is interconnected and transferred via CI: p8505.
Dependency: Refer to: p8505
r8512 CO: Data transfer 0 receive wordwise / Trans 0 recv word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r8513 CO: Data transfer 1 receive wordwise / Trans 1 recv word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r8514 CO: Data transfer 2 receive wordwise / Trans 2 recv word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r8515 CO: Data transfer 3 receive wordwise / Trans 3 recv word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]