Siemens SINAMICS S110 - r9711[0...1] SI Motion diagnostics result list 2; SI Mtn res_list 2

Parameter
List of parameters
1-588
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Dependency: Refer to: C01711
Note: SBR: Safe Brake Ramp (safe brake ramp monitoring)
SLP: Safely-Limited Position
SLS: Safely-Limited Speed
SOS: Safe Operating Stop
Description: Displays result list 2 that, for the crosswise data comparison between the monitoring channels, led to the fault.
Index: [0] = Result list, second channel
[1] = Result list, drive
Dependency: Refer to: C01711
Note: SCA: Safe Cam
SSM: Safe Speed Monitor (safety-relevant feedback signal from the velocity monitoring)
03 Actual value > lower limit, SLP1 Yes No -
04 Actual value > upper limit, SLP2 Yes No -
05 Actual value > lower limit, SLP2 Yes No -
06 Actual value > upper limit, SLS1 Yes No -
07 Actual value > lower limit, SLS1 Yes No -
08 Actual value > upper limit, SLS2 Yes No -
09 Actual value > lower limit, SLS2 Yes No -
10 Actual value > upper limit, SLS3 Yes No -
11 Actual value > lower limit, SLS3 Yes No -
12 Actual value > upper limit, SLS4 Yes No -
13 Actual value > lower limit, SLS4 Yes No -
16 Actual value > upper limit, SAM/SBR Yes No -
17 Actual value > lower limit, SAM/SBR Yes No -
18 Actual value > upper limit SDI positive Yes No -
19 Actual value > lower limit SDI positive Yes No -
20 Actual value > upper limit SDI negative Yes No -
21 Actual value > lower limit SDI negative Yes No -
r9711[0...1] SI Motion diagnostics result list 2 / SI Mtn res_list 2
SERVO_S110-CAN,
SERVO_S110-DP,
SERVO_S110-PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Safety Integrated Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 Actual value > upper limit SCA1+ Yes No -
01 Actual value > lower limit, SCA1+ Yes No -
02 Actual value > upper limit SCA1- Yes No -
03 Actual value > lower limit, SCA1- Yes No -
04 Actual value > upper limit SCA2+ Yes No -
05 Actual value > lower limit, SCA2+ Yes No -
06 Actual value > upper limit SCA2- Yes No -
07 Actual value > lower limit, SCA2- Yes No -
08 Actual value > upper limit SCA3+ Yes No -
09 Actual value > lower limit, SCA3+ Yes No -
10 Actual value > upper limit SCA3- Yes No -
11 Actual value > lower limit, SCA3- Yes No -
12 Actual value > upper limit SCA4+ Yes No -
13 Actual value > lower limit, SCA4+ Yes No -
14 Actual value > upper limit SCA4- Yes No -
15 Actual value > lower limit, SCA4- Yes No -
16 Actual value > upper limit, SSM+ Yes No -
17 Actual value > lower limit, SSM+ Yes No -
18 Actual value > upper limit, SSM- Yes No -
19 Actual value > lower limit, SSM- Yes No -
20 Actual value > upper limit, modulo Yes No -
21 Actual value > lower limit, modulo Yes No -