Siemens SINAMICS S110 - p20168 BI: PDF 0 input pulse I; PDF 0 inp_pulse I; p20169 PDF 0 pulse extension time in ms; PDF 0 t_ext ms; r20170 BO: PDF 0 output Q; PDF 0 output Q; p20171 PDF 0 run-time group; PDF 0 RTG

Parameter
List of parameters
1-696
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Description: Sets the signal source for the input pulse I of instance PDF 0 of the breaking delay device.
Description: Setting parameter for pulse extension time T in milliseconds of instance PDF 0 of the breaking delay device.
Description: Display parameter for output pulse Q of instance PDF 0 of the breaking delay device.
Description: Setting parameter for the run-time group in which the instance PDF 0 of the breaking delay device is to be called.
Value: 0: Run-time group 0
1: Run-time group 1
2: Run-time group 2
p20168 BI: PDF 0 input pulse I / PDF 0 inp_pulse I
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN,
SERVO_S110-CAN
(FBLOCKS),
SERVO_S110-DP
(FBLOCKS),
SERVO_S110-PN
(FBLOCKS)
Can be changed: T Calculated: - Access level: 1
Data type: Unsigned32 / Binary Dynamic index: - Func. diagram: 7232
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - 0
p20169 PDF 0 pulse extension time in ms / PDF 0 t_ext ms
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN,
SERVO_S110-CAN
(FBLOCKS),
SERVO_S110-DP
(FBLOCKS),
SERVO_S110-PN
(FBLOCKS)
Can be changed: T Calculated: - Access level: 1
Data type: FloatingPoint32 Dynamic index: - Func. diagram: 7232
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0.00 60000.00 0.00
r20170 BO: PDF 0 output Q / PDF 0 output Q
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN,
SERVO_S110-CAN
(FBLOCKS),
SERVO_S110-DP
(FBLOCKS),
SERVO_S110-PN
(FBLOCKS)
Can be changed: - Calculated: - Access level: 1
Data type: Unsigned32 Dynamic index: - Func. diagram: 7232
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
p20171 PDF 0 run-time group / PDF 0 RTG
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN,
SERVO_S110-CAN
(FBLOCKS),
SERVO_S110-DP
(FBLOCKS),
SERVO_S110-PN
(FBLOCKS)
Can be changed: T Calculated: - Access level: 1
Data type: Integer16 Dynamic index: - Func. diagram: 7232
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 9999 9999