Siemens SINAMICS S110 - p4782[0...1] Trace physical address signal 2; Trace PhyAddr Sig2; p4783[0...1] Trace physical address signal 3; Trace PhyAddr Sig3; p4784[0...1] Trace physical address signal 4; Trace PhyAddr Sig4; p4785[0...1] Trace physical address signal 5; Trace PhyAddr Sig5

List of parameters
Parameter
1-467
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Description: Sets the physical address for the third signal to be traced.
The data type is defined using p4732.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the fourth signal to be traced.
The data type is defined using p4733.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the fifth signal to be traced.
The data type is defined using p4734.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the sixth signal to be traced.
The data type is defined using p4735.
Index: [0] = Trace 0
[1] = Trace 1
p4782[0...1] Trace physical address signal 2 / Trace PhyAddr Sig2
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4783[0...1] Trace physical address signal 3 / Trace PhyAddr Sig3
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4784[0...1] Trace physical address signal 4 / Trace PhyAddr Sig4
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4785[0...1] Trace physical address signal 5 / Trace PhyAddr Sig5
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin