Siemens SINAMICS S110 - p8502 CI: Data transfer 0 wordwise; Transfer 0 word; p8503 CI: Data transfer 1 wordwise; Transfer 1 word; p8504 CI: Data transfer 2 wordwise; Transfer 2 word; p8505 CI: Data transfer 3 wordwise; Transfer 3 word

Parameter
List of parameters
1-494
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
[15] = Send signal to BO: r8511.15
[16] = Send signal to BO: r8511.16
[17] = Send signal to BO: r8511.17
[18] = Send signal to BO: r8511.18
[19] = Send signal to BO: r8511.19
[20] = Send signal to BO: r8511.20
[21] = Send signal to BO: r8511.21
Dependency: Refer to: r8511
Description: Sets the signal source for the wordwise data transfer (process signal).
This signal value is available in CO: r8512 for further interconnection.
Dependency: Refer to: r8512
Description: Sets the signal source for the wordwise data transfer (process signal).
This signal value is available in CO: r8513 for further interconnection.
Dependency: Refer to: r8513
Description: Sets the signal source for the wordwise data transfer (process signal).
This signal value is available in CO: r8514 for further interconnection.
Dependency: Refer to: r8514
Description: Sets the signal source for the wordwise data transfer (process signal).
This signal value is available in CO: r8515 for further interconnection.
Dependency: Refer to: r8515
p8502 CI: Data transfer 0 wordwise / Transfer 0 word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 / Integer32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0
p8503 CI: Data transfer 1 wordwise / Transfer 1 word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 / Integer32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0
p8504 CI: Data transfer 2 wordwise / Transfer 2 word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 / Integer32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0
p8505 CI: Data transfer 3 wordwise / Transfer 3 word
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 2
Data type: Unsigned32 / Integer32 Dynamic index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0