Siemens SINAMICS S110 - p4786[0...1] Trace physical address signal 6; Trace PhyAddr Sig6; p4787[0...1] Trace physical address signal 7; Trace PhyAddr Sig7; p4789[0...1] Trace physical address trigger signal; Trace PhyAddr Trig; r4790[0...1] Trace, data type 5 traced; Trace rec type 5

Parameter
List of parameters
1-468
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Description: Sets the physical address for the seventh signal to be traced.
The data type is defined using p4736.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the eighth signal to be traced.
The data type is defined using p4737.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the trigger signal.
The data type is defined by making the appropriate selection in p4711.
Index: [0] = Trace 0
[1] = Trace 1
Index: [0] = Trace 0
[1] = Trace 1
p4786[0...1] Trace physical address signal 6 / Trace PhyAddr Sig6
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4787[0...1] Trace physical address signal 7 / Trace PhyAddr Sig7
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4789[0...1] Trace physical address trigger signal / Trace PhyAddr Trig
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 hex FFFF FFFF hex 0000 hex
r4790[0...1] Trace, data type 5 traced / Trace rec type 5
CU_S110-CAN,
CU_S110-DP,
CU_S110-PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dynamic index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -