Faults and alarms
Overview of faults and alarms
3-972
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
Acknowledge: Default acknowledgment (adjustable acknowledgment)
Specifies the default method of acknowledging faults after the cause has been
eliminated.
The optional parentheses indicate whether the default acknowledgment can be
changed and which acknowledgment can be adjusted via parameters (p2126,
p2127).
Note:
See Chapter 3.1.1
Cause:
Description of the possible causes of the fault/alarm. A fault or alarm value can
also be specified (optional).
Fault value (r0949, format):
The fault value is entered in the fault buffer in r0949[0...63] and specifies addi-
tional, more precise information about a fault.
Alarm value (r2124, format):
The alarm value specifies additional, more precise information about an alarm.
The alarm value is entered in the alarm buffer in r2124[0...7] and specifies addi-
tional, more precise information about an alarm.
Remedy:
Description of the methods available for eliminating the cause of the active
fault/alarm
Alarm
In certain cases, servicing and maintenance personnel are responsible for choos-
ing a suitable method for eliminating the cause of faults.
To Next Page
Loading...
