Siemens SINAMICS S110 - Page 1274

Index
C-1274
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
2450
PZD send signals, interconnection
manufacturer-specific, 2-789
2452
ZSW1 status word interconnection
(p2038 = 0), 2-790
2453
ZSW1 status word interconnection
(p2038 = 1), 2-791
2454
ZSW2 status word interconnection
(p2038 = 0), 2-792
2455
ZSW2 status word interconnection
(p2038 = 1), 2-793
2456
MELDW status word interconnection,
2-794
2462
PosSTW-Pos control word
interconnection (r0108.4 = 1), 2-795
2463
POS_STW1 positioning control word 1
interconnection (r0108.4 = 1), 2-796
2464
POS_STW2 positioning control word 2
interconnection (r0108.4 = 1), 2-797
2466
POS_ZSW1 positioning status word 1
interconnection (r0108.4 = 1), 2-798
2467
POS_ZSW2 positioning status word 2
interconnection (r0108.4 = 1), 2-799
2468
IF1 receive telegram, free interconnection
via BICO (p0922 = 999), 2-800
2470
IF1 send telegram, free interconnection
via BICO (p0922 = 999), 2-801
2472
IF1 status words, free interconnection,
2-802
2475
STW1 control word 1 interconnection
(r0108.4 = 1), 2-803
2476
SATZANW-Pos block selection
interconnection (r0108.4 = 1), 2-804
2479
ZSW1 status word 1 interconnection
(r0108.4 = 1), 2-805
2480
MDIMode interconnection (r0108.4 = 1),
2-806
2481
IF1 receive telegram, free interconnection
via BICO (p0922 = 999), 2-807
2483
IF1 send telegram, free interconnection
via BICO (p0922 = 999), 2-808
2495
CU_STW control word, Control Unit
interconnection, 2-809
2496
CU_ZSW status word, Control Unit
interconnection, 2-810
2497
A_DIGITAL interconnection, 2-811
2498
E_DIGITAL interconnection, 2-812
2501
Control word, sequence control, 2-814
2503
Status word, sequence control, 2-815
2505
Control word, setpoint channel, 2-816
2520
Control word, speed controller, 2-817
2522
Status word, speed controller, 2-818
2526
Status word, closed-loop control, 2-819
2530
Status word, closed-loop current control,
2-820
2534
Status word, monitoring functions 1,
2-821
2536
Status word, monitoring functions 2,
2-822
2537
Status word, monitoring functions 3,
2-823
2546
Control word, faults/alarms, 2-824
2548
Status word, faults/alarms 1 and 2, 2-825
2610
Seq
uencer, 2-827
2634
Missing enable signals, line contactor
control, 2-828