Siemens SINAMICS S110 - Page 1275

Index
C-1275
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
2701
Basic brake control (r0108.14 = 0), 2-830
2704
Extended brake control, zero-speed
detection (r0108.14 = 1), 2-831
2707
Extended brake control, open/close brake
(r0108.14 = 1), 2-832
2711
Extended brake control, signal outputs
(r0108.14 = 1), 2-833
2800
Basic Functions, parameter manager,
2-835
2802
Basic functions, monitoring functions and
faults/alarms, 2-836
2804
Basic Functions, status words, 2-837
2810
Basic Functions, STO (Safe Torque
Off)/SS1 (Safe Stop 1), 2-838
2811
Basic Functions, STO (Safe Torque Off),
safe pulse cancellation, 2-839
2814
Basic Functions,
SBC (Safe Brake Control), 2-840
2820
Extended Functions,
SLS (Safely-Limited Speed), 2-841
2825
Extended Functions, SS1, SS2, SOS,
Internal STOP B, C, D, F, 2-842
2840
Extended Functions, control word and
status word, 2-843
2846
Extended Functions, parameter manager,
2-844
2850
Extended Functions (F-DI0...F-DI2),
2-845
2853
Extended Functions (F-DO/ 0), 2-846
2855
Extended Functions, control interface,
2-847
2856
Extended Functions, Safe State selection,
2-848
2857
Extended Functions, assignment
(F-DO 0), 2-849
2858
Extended Functions, control via
PROFIsafe (p9601.2 = p9601.3 = 1),
2-850
2860
Extended Functions, SSM (Safe Speed
Monitor), 2-851
2861
Extended Functions, SDI (Safe Direction),
2-852
3010
Fixed speed setpoints, 2-854
3020
Motorized potentiometer, 2-855
3030
Main/supplementary setpoint, setpoint
scaling, jogging, 2-856
3040
Direction limitation and direction reversal,
2-857
3050
Skip frequency bands and speed
limitations, 2-858
3060
Basic ramp-function generator, 2-859
3070
Extended ramp-function generator, 2-860
3080
Ramp-function generator selection, status
word, tracking, 2-861
3095
Generating the speed limits (r0108.8 = 0),
2-863
3610
Jog mode (r0108.4 = 1), 2-865
3612
Referencing/reference point approach
mode (r0108.4 = 1)
(p2597 = 0-signal), 2-866
3614
Flying referencing mode (r0108.4 = 1)
(p2597 = 1 signal), 2-867
3615
Traversing blocks, external block change
mode (r0108.4 = 1), 2-868
3616
Traversing blocks mode (r0108.4 = 1),
2-
869
3617
Travel to fixed stop (r0108.4 = 1), 2-870