Siemens SINAMICS S110 - Page 1277

Index
C-1277
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
7014
External Armature Short-Circuit (EASC,
p0300 = 2xx or 4xx), 2-913
7017
DC brake (p0300 = 1xx), 2-914
7200
General information, 2-916
7210
AND (AND function block with 4 inputs),
2-917
7212
OR (OR function block with 4 inputs),
2-918
7214
XOR (XOR function block with 4 inputs),
2-919
7216
NOT (inverter), 2-920
7220
ADD (adder with 4 inputs),
SUB (subtracter), 2-921
7222
MUL (multiplier),
DIV (divider), 2-922
7224
AVA (absolute value generator), 2-923
7230
MFP (pulse generator), PCL (pulse
contractor), 2-924
7232
PDE (ON delay), PDF (OFF delay), 2-925
7234
PST (pulse stretcher), 2-926
7240
RSR (RS flip-flop),
DFR (D flip-flop), 2-927
7250
BSW (binary switch), NSW (numeric
switch), 2-928
7260
LIM (limiter), 2-929
7262
PT1 (smoothing element), 2-930
7264
INT (integrator),
DIF (derivative-action element), 2-931
7270
LVM (double-sided limit monitor
with hysteresis), 2-932
7950
Fixed values (r0108.16 = 1), 2-934
7951
Fixed values, direct selection (p2216 = 1),
2-935
7954
Motorized potentiometer (r0108.16 = 1),
2-936
7958
Closed-loop control (r0108.16 = 1), 2-937
8010
Speed signals 1, 2-939
8011
Speed signals 2, 2-940
8012
Torque signals, motor locked/stalled,
2-941
8014
Thermal monitoring, power unit, 2-942
8016
Thermal monitoring, motor, 2-943
8060
Fault buffer, 2-945
8065
Alarm buffer, 2-946
8070
Fault/alarm trigger word (r2129), 2-947
8075
Fault/alarm configuration, 2-948
8134
Measuring sockets, 2-949
8560
Command Data Sets (CDS), 2-951
8565
Drive Data Sets (DDS), 2-952
8570
Encoder Data Sets (EDS), 2-953
8575
Motor Data Sets (MDS), 2-954
9204
Receive telegram, free PDO mapping
(p8744 = 2), 2-956
9206
Receive telegram, Predefined Connection
Set (p8744 = 1), 2-957
9208
Send telegram, free PDO mapping
(p
8744 = 2), 2-958
9210
Send telegram, Predefined Connection
Set (p8744 = 1), 2-959
9220
Control word, CANopen, 2-960