Dell Force10 Z9000 - Clear Ip Mroute; Object Missing

Object Missing
This object is not available in the repository.
clear ip mroute
Clear learned multicast routes on the multicast forwarding table. To clear the protocol-independent multicast (PIM) tree
information base, use the
clear ip pim tib command.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
clear ip mroute {group-address [source-address] | *}
Parameters
group-address
[ source-address ]
Enter the multicast group address and source address (if desired), in
dotted decimal format, to clear information on a specific group.
* Enter * to clear all multicast routes.
Command Modes EXEC Privilege
Command History
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
show ip pim tib – shows the PIM tree information base.
ip mroute
Assign a static mroute.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf}
process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance]
To delete a specific static mroute, use the ip mroute destination mask {ip-
address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {
ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute destination
mask
command.
1009