Related
Commands
• distribute-list in – filters the networks received in updates.
• redistribute – redistributes routes from one routing domain to another routing domain.
distribute-list redistributed-override
Suppress flapping of routes when the same route is redistributed into IS-IS from multiple routers in the network.
E-Series, S4810
Syntax
distribute-list redistributed-override in
To return to the default, use the no distribute-list redistributed-override
in command.
Defaults none
Command Modes
• ROUTER ISIS (
for IPv4
)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (
for IPv6
)
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 7.8.1.0 Added IPv6 ISIS support.
Version 6.3.1.0 Introduced.
Usage
Information
When you execute this command, IS-IS does not download the route to the routing table if the
same route was redistributed into IS-IS routing protocol on the same router.
domain-password
Set the authentication password for a routing domain.
E-Series, S4810
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password
using MD5.
encryption-type
(OPTIONAL) Enter 7 to encrypt the password using DES.
867
To Next Page
Loading...
