Dell Force10 Z9000 - Ssh-Peer-Rpm; Ssh-Peer-Stack-Unit

ssh-peer-rpm
Open an secure shell (SSH) connection to the peer RPM.
C-Series, E-Series
Syntax
ssh-peer-rpm [-l username]
Parameters
-l username (OPTIONAL) Enter the keyword -l followed by your user name.
Default: The user name associated with the terminal.
Defaults Not configured.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
Usage
Information
This command is not available when the peer RPMs are running different FTOS releases.
ssh-peer-stack-unit
Open an SSH connection to the peer RPM.
S-Series, Z-Series
Syntax
ssh-peer-stack-unit [-l username]
Parameters
-l username (OPTIONAL) Enter the keyword -l followed by your user name. The
default is the user name associated with the terminal.
Defaults Not configured.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.11.1 Introduced on the S-Series.
185