Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
If no ports are GVRP participants, the message output changes from GVRP Participants
running on <port_list> to GVRP Participants running on no ports.
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Gi 3/0 Disabled No
Gi 3/1 Disabled No
Gi 3/2 Enabled No
Gi 3/3 Disabled No
Gi 3/4 Disabled No
Gi 3/5 Disabled No
Gi 3/6 Disabled No
Gi 3/7 Disabled No
Gi 3/8 Disabled No
R3#show gvrp brief
Related
Commands
show gvrp statistics – displays the GVRP statistics.
show gvrp statistics
Display the GVRP configuration statistics.
C-Series, E-Series, S-Series, Z-Series
Syntax
show gvrp statistics {interface interface | summary}
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface followed by one of the
interface keywords and slot/ port or number information:
• For a Fast Ethernet interface, enter the keyword
FastEthernet followed by the slot/ port information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
657
To Next Page
Loading...
