Dell Force10 Z9000 - Redistribute Bgp

• 2 = OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag followed by a number. The range
is 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Usage
Information
To redistribute the default route (0.0.0.0/0), configure the default-information
originate command.
Related
Commands
default-information originate – generates a default route into the OSPF routing domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
redistribute bgp as number [metric metric-value] | [metric-type
type-value] | [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric
metric-value] | [metric-type type-value] [route-map map-name]
[tag tag-value] command.
Parameters
as number Enter the autonomous system number. The range is 1 to 65535.
metric metric-
value
(OPTIONAL) Enter the keyword metric followed by the metric-value
number. The range is 0 to16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type followed by one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
1068