Dell Force10 Z9000 - 11 Control Plane Policing (Copp); Control-Plane-Cpuqos; Service-Policy Rate-Limit-Cpu-Queues

11
Control Plane Policing (CoPP)
The CoPP commands are supported on the Dell Force10 S4810 and Z-Series platforms.
control-plane-cpuqos
Enter control-plane mode and configure the switch to manage control-plane traffic.
Z-Series, S4810
Syntax
control-plane-cpuqos
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
S4810, Z-Series
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32 characters.
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
561