Dell Force10 Z9000 - Show Ip Bgp Paths Community

Field Description
Address Displays the internal address where the path attribute is stored.
Hash Displays the hash bucket where the path attribute is stored.
Refcount Displays the number of BGP routes using these AS-Paths.
AS-Path Displays the AS paths for this route, with the origin code for the
route listed last. Numbers listed between braces {} are AS_SET
information.
Example
FTOS#show ip bgp paths as-path
Total 13 AS-Paths
Address Hash Refcount AS-Path
0x1ea3c1ec 251 1 42
0x1ea3c25c 251 1 22
0x1ea3c1b4 507 1 13
0x1ea3c304 507 1 33
0x1ea3c10c 763 1 {92 93}
0x1ea3c144 763 1 {102 103}
0x1ea3c17c 763 1 12
0x1ea3c2cc 763 1 32
0x1ea3c09c 764 1 {72 73}
0x1ea3c0d4 764 1 {82 83}
0x1ea3c224 1019 1 43
0x1ea3c294 1019 1 23
0x1ea3c02c 1021 4
FTOS#
show ip bgp paths community
View all unique COMMUNITY numbers in the BGP database.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip bgp paths community
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp paths community command shown in the
Example below.
Field
Description
Address Displays the internal address where the path attribute is stored.
409