Dell Force10 Z9000 - Debug Ip Ssh; Ip Scp Topdir

Related
Commands
ip ssh server – enables the SSH server.
show crypto – displays the SSH host public keys.
debug ip ssh
Enables collecting SSH debug information.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
debug ip ssh {client | server}
To disable debugging, use the no debug ip ssh {client | server} command.
Parameters
client Enter the keyword client to enable collecting debug information
on the client.
server Enter the keyword server to enable collecting debug information
on the server.
Defaults Disabled on both client and server.
Command Modes EXEC
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
Debug information includes details for key-exchange, authentication, and established session
for each connection.
ip scp topdir
Identify a location for files used in secure copy transfer.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip scp topdir directory
To return to the default setting, use the no ip scp topdir command.
Parameters
directory Enter a directory name.
Defaults The internal flash (flash:) is the default directory.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
1325