Dell Force10 Z9000 - Show Debugging; Show Environment (C-Series and E-Series)

Related
Commands
debug cpu-traffic-stats – enables CPU traffic statistics for debugging.
show debugging
View a list of all enabled debugging processes.
C-Series, E-Series, S-Series, Z-Series
Syntax
show debugging
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series
E-Series Original command.
Example
FTOS#show debug
Generic IP:
IP packet debugging is on for
ManagementEthernet 0/0
Port-channel 1-2
Port-channel 5
GigabitEthernet 4/0-3,5-6,10-11,20
GigabitEthernet 5/0-1,5-6,10-11,15,17,19,21
ICMP packet debugging is on for
GigabitEthernet 5/0,2,4,6,8,10,12,14,16
FTOS#
show environment (C-Series and E-Series)
View the system component status (for example, temperature or voltage).
C-Series, E-Series
Syntax
show environment [all | fan | linecard | linecard-voltage | PEM
| RPM | SFM]
Parameters
all Enter the keyword all to view all components.
fan Enter the keyword fan to view information on the fans. The output of
this command is chassis dependent.
142