Related
Commands
show ip bgp – view the current BGP routing table.
show ip bgp ipv6 unicast peer-group
Allows you to view information on the BGP peers in a peer group.
E-Series
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name
(OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
summary (OPTIONAL) Enter the keyword summary to view status information
of the peers in that peer group. The output is the same as that found
in show ip bgp summary command
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.4.1.0 Introduced
Related
Commands
• neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
• neighbor peer-group (creating group) – creates a peer group.
show ip bgp ipv6 unicast summary
Allows you to view the status of all BGP connections.
E-Series
Syntax
show ip bgp ipv6 unicast summary
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.4.1.0 Introduced
Usage
Information
The following describes the show ip bgp summary command fields.
Field
Description
BGP router identifier Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
537
To Next Page
Loading...
