Dell Force10 Z9000 - Redistribute Isis; Redistribute Ospf

redistribute isis
Redistribute routing information from an IS-IS instance.
C-Series, E-Series, S4810
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value] [route-map map-name]
command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS
Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-
IS Level-1 and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS
Level-2 routes.
metric metric-
value
(OPTIONAL) Enter the keyword metric followed by a number as the
metric value. The range is 0 to 16.
route-map map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of a configured route map.
Defaults Not configured.
Command Modes ROUTER RIP
Command History
Version 8.3.7.0 Introduced on the S4810.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
IS-IS is not supported on the S-Series systems.
redistribute ospf
Redistribute routing information from an OSPF process.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
redistribute ospf process-id [match external {1 | 2} | match
internal | metric metric-value] [route-map map-name]
1251