Dell Force10 Z9000 - Show Ip Bgp Filter-List; Show Ip Bgp Flap-Statistics

Field Description
Network Displays the network ID to which the route is dampened.
From Displays the IP address of the neighbor advertising the dampened
route.
Reuse Displays the hour:minutes:seconds until the dampened route is
available.
Path Lists all the ASs the dampened route passed through to reach the
destination network.
Example
FTOS>show ip bgp damp
BGP table version is 210708, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
FTOS>
show ip bgp filter-list
View the routes that match the filter lists.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
show ip bgp flap-statistics
View flap statistics on BGP routes.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast flap-statistics [ip-address [mask]]
[filter-list as-path-name] [regexp regular-expression]
437