Dell Force10 Z9000 - Show Snmp Group

Example
FTOS#show snmp engineID
Local SNMP engineID: 0000178B02000001E80214A8
Remote Engine ID IP-addr Port
80001F88043132333435 172.31.1.3 5009
80001F88043938373635 172.31.1.3 5008
FTOS#
Related
Commands
snmp-server engineID – configures local and remote SNMP engines on the router.
show snmp group
Display the group name, security model, status, and storage type of each group.
C-Series, E-Series, S-Series, Z-Series
Syntax
show snmp group
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The following Example displays a group named ngroup . The ngroup has a security model of
version 3 (v3) with authentication (auth), the read and notify name is nview with no write view
name specified, and finally the row status is active.
Example
FTOS#show snmp group
groupname: ngroup security model: v3 auth
readview : nview writeview: no write view specified
notifyview: nview
row status: active
FTOS#
Related
Commands
snmp-server group – configures an SNMP server group.
1363