Dell Force10 Z9000 - Show Tech-Support (C-Series and E-Series)

-- Power Supplies --
Unit Bay Status Type
---------------------------------------------------------------
----------
--
0 0 up AC
Related
Commands
• show version – displays the FTOS version.
• show processes memory (S-Series) – displays the memory usage based on running
processes.
• show hardware stack-unit – displays the data plane and management plane input and
output statistics of a particular stack member.
show tech-support (C-Series and E-Series)
Display, or save to a file, a collection of data from other show commands, the information necessary for Dell Force10
technical support to perform troubleshooting.
C-Series, E-Series
Syntax
show tech-support [linecard 0-6 | page] | {display | except |
find | grep | no-more | save}
Parameters
linecard 0-6 (OPTIONAL) Enter the keyword linecard followed by the linecard
number to view information relating to a specific linecard.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time.
Press the SPACE BAR to view the next 24 lines. Press ENTER to view
the next line of text.
display, except,
find, grep, no-
more
If you use the pipe command ( | ), enter one of these keywords to filter
command output.
save Enter the keyword save (following the pipe) to save the command
output.
• flash: Save to local flash drive (flash://filename [max
20 chars] )
• slot0: Save to local file system (slot0://filename [max
20 chars] )
Command Modes EXEC Privilege
Command History
Version 7.8.1.0 Introduced save to the file options.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.4.0 Show clock included in the display on the E-Series.
179