Dell Force10 Z9000 - AS-Path Commands; Deny

Parameters
map-name (OPTIONAL) Enter the name of a configured route map, up to 140
characters.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters. Prior to
7.8.1.0, names are up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example
FTOS#show route-map
route-map firpo, permit, sequence 10
Match clauses:
Set clauses:
tag 34
FTOS#
Related
Commands
route-map – configures a route map.
AS-Path Commands
The following commands configure AS-Path ACLs.
deny
Create a filter to drop routes that match the route’s AS-PATH attribute. Use regular expressions to identify which routes
are affected by the filter.
E-Series
Syntax
deny as-regular-expression
Parameters
as-regular-
expression
Enter a regular expression to match BGP AS-PATH attributes.
Use one or a combination of the following:
303