Dell Force10 Z9000 - Test Cam-Usage

Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
pre-Version
6.1.1.1
Introduced on the E-Series.
Example
FTOS#show qos wred-profile
Wred-profile-name min-threshold max-threshold
wred_drop 0 0
wred_ge_y 1024 2048
wred_ge_g 2048 4096
wred_teng_y 4096 8192
wred_teng_g 8192 16384
WRED1 2000 7000
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
test cam-usage service-policy input policy-map linecard
{[number port-set portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
linecard number (OPTIONAL) Enter the keyword linecard followed by the line card
slot number.
port-set portpipe
number
Enter the keywords port-set followed by the line card’s port pipe
number. The range is 0 or 1.
linecard all (OPTIONAL) Enter the keywords linecard all to indicate all line
cards.
Defaults none
Command Modes EXEC
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the C-Series and S-Series.
1228