Dell Force10 Z9000 - Show Ip Bgp Summary

*>I 4.0.0.0/8 1.1.1.2 0 100 0 2914 3356 i
*>I 4.17.225.0/24 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.226.0/23 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.251.0/24 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.17.252.0/23 1.1.1.2 0 100 0 2914 11853
11853 11853 11853 11853 6496
*>I 4.19.2.0/23 1.1.1.2 0 100 0 2914 701
6167 6167 6167 i
*>I 4.19.16.0/23 1.1.1.2 0 100 0 2914 701
6167 6167 6167 i
*>I 4.21.80.0/22 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.82.0/24 1.1.1.2 0 100 0 2914 174
4200 16559 i
*>I 4.21.252.0/23 1.1.1.2 0 100 0 2914 701
6389 8063 19198 i
*>I 4.23.180.0/24 1.1.1.2 0 100 0 2914 3561
6128 30576 i
*>I 4.36.200.0/21 1.1.1.2 0 100 0 2914 14742
11854 14135 i
*>I 4.67.64.0/22 1.1.1.2 0 100 0 2914 11608
19281 i
*>I 4.78.32.0/21 1.1.1.2 0 100 0 2914 3491
29748 i
*>I 6.1.0.0/16 1.1.1.2 0 100 0 2914 701 668
i
*>I 6.2.0.0/22 1.1.1.2 0 100 0 2914 701 668
i
*>I 6.3.0.0/18 1.1.1.2 0 100 0 2914 701 668
i
show ip bgp summary
Allows you to view the status of all BGP connections.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip bgp [ipv4 unicast] summary
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
The following describes the show ip bgp summary command shown in the Example
below.
414