Dell Force10 Z9000 - Show Console Lp; Show Cpu-Traffic-Stats

show console lp
View the buffered boot-up log of a line card.
C-Series, E-Series
Syntax
show console lp number
Parameters
number Enter the line card slot number. Range:
• 0–7 for the C300
• 0–13 for the E1200
• 0–6 for the E600
• 0–5 for the E300
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
CAUTION: Use this command only when you are working directly with a technical support
representative to troubleshoot a problem. Do not use this command unless a technical
support representative instructs you to do so.
show cpu-traffic-stats
View the CPU traffic statistics.
C-Series, E-Series, S-Series, Z-Series
Syntax
show cpu-traffic-stats [port number | all | cp | linecard {all
| slot# } | rp1 | rp2 ]
Parameters
port number (OPTIONAL) Enter the port number to display traffic statistics on that
port only. Range: 1 to 1568.
all (OPTIONAL) Enter the keyword all to display traffic statistics on all
the interfaces receiving traffic, sorted based on the traffic.
cp (OPTIONAL) Enter the keyword cp to display traffic statistics on the
specified CPU.
140