Dell Force10 Z9000 - Show Fip-Snooping Enode; Show Fip-Snooping Fcf

show fip-snooping enode
Display information on the ENodes in FIP-snooped sessions, including the ENode interface and MAC address, FCF MAC
address, VLAN ID and FC-ID.
S4810 and MXL Switch
Syntax
show fip-snooping enode [enode-mac-address]
Parameters
enode-mac-
address
Enter the MAC address of the ENodes to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show fip-snooping enode command shown in the
Example below.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
VLAN VLAN ID number the session uses.
FC-ID Fibre Channel session ID the FCF assigns.
Example
FTOS# show fip-snooping enode
Enode MAC Enode Interface FCF MAC VLAN FC-ID
--------- --------------- ------- ---- -----
d4:ae:52:1b:e3:cd Te 0/11 54:7f:ee:37:34:40 100
62:00:11
show fip-snooping fcf
Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address, FCF interface,
VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.
S4810 and MXL Switch
Syntax
show fip-snooping fcf [fcf-mac-address]
630