Dell Force10 Z9000 - Show Cam-Usage

Profile Name : DEFAULT : DEFAULT
L2FIB : 32K entries : 32K entries
L2ACL : 1K entries : 1K entries
IPv4FIB : 256K entries : 256K entries
IPv4ACL : 12K entries : 12K entries
IPv4Flow : 24K entries : 24K entries
EgL2ACL : 1K entries : 1K entries
EgIPv4ACL : 1K entries : 1K entries
Reserved : 8K entries : 8K entries
IPv6FIB : 0 entries : 0 entries
IPv6ACL : 0 entries : 0 entries
IPv6Flow : 0 entries : 0 entries
EgIPv6ACL : 0 entries : 0 entries
MicroCode Name : Default : Default
-- Line card 0 --
CamSize : 18-Meg
: Current Settings : Next Boot
Profile Name : DEFAULT : DEFAULT
L2FIB : 32K entries : 32K entries
L2ACL : 1K entries : 1K entries
IPv4FIB : 256K entries : 256K entries
IPv4ACL : 12K entries : 12K entries
IPv4Flow : 24K entries : 24K entries
EgL2ACL : 1K entries : 1K entries
EgIPv4ACL : 1K entries : 1K entries
Reserved : 8K entries : 8K entries
IPv6FIB : 0 entries : 0 entries
IPv6ACL : 0 entries : 0 entries
IPv6Flow : 0 entries : 0 entries
EgIPv6ACL : 0 entries : 0 entries
MicroCode Name : Default : Default
FTOS#
show cam-usage
Display Layer 2, Layer 3, ACL, or all CAM usage statistics.
E-Series
Syntax
show cam-usage [acl | router | switch]
Parameters
acl (OPTIONAL) Enter the keyword acl to display Layer 2 and Layer 3
ACL CAM usage.
router (OPTIONAL) Enter the keyword router to display Layer 3 CAM
usage.
switch (OPTIONAL) Enter the keyword switch to display Layer 2 CAM
usage.
Defaults none
Command Modes EXEC Privilege
Command History
Version 6.5.1.0 Introduced on the E-Series.
Example
FTOS#show cam-usage
Linecard|Portpipe|CAM Partition |Total CAM|Used CAM|
555