Dell Force10 Z9000 - Clear Ip Bgp Flap-Statistics

Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
clear ip bgp flap-statistics
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
C-Series, E-Series TeraScale, S-Series
Syntax
clear ip bgp ipv4 multicast flap-statistics network | filter-
list list |regexp regexp
Parameters
Network (OPTIONAL) Enter the network address to clear flap statistics in
dotted decimal format (A.B.C.D).
filter-list as-path-
name
(OPTIONAL) Enter the keyword filter-list followed by the
name of a configured AS-PATH list (maximum 16 characters).
regexp regular-
expression
(OPTIONAL) Enter the keyword regexp followed by regular
expressions. Use one or a combination of the following:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more
sequences).
• + = (plus) the sequences in a pattern (1 or more sequences).
• ? = (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v) prior
to entering the ? regular expression.
• [ ] = (brackets) a range of single-character patterns.
• ( ) = (parenthesis) groups a series of pattern elements to a
single element.
• { } = (braces) minimum and the maximum match count.
• ^ = (caret) the beginning of the input string. If you use the
caret at the beginning of a sequence or range, it matches on
everything BUT the characters specified.
• $ = (dollar sign) the end of the output string.
Command Modes EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
421