Dell Force10 Z9000 - Hash-Algorithm Hg-Seed; Hash-Algorithm Seed

hash-algorithm hg-seed
Select the seed value to be used in HiGig hashing.
Z-Series
Syntax
[no] hash-algorithm hg-seed number | stack-unit unit number
port-set port-pipe
Parameters
hg-seed number Enter the keywords hg-seed followed by the hash algorithm seed
value. The range is 0 to 2147483646.
stack-unit unit
number
Enter the keywords stack-unit followed by the stack unit number.
The range is 0 to 7.
port-set port-pipe Enter the keywords port-set followed by the line card’s port-pipe
number. The range is 0 to 5.
Defaults 32-bit chassis MAC and system time
Command Modes CONFIGURATION
Command History
Version 8.3.11.4 Introduced on the Z9000.
hash-algorithm seed
Select the seed value for the ECMP, LAG, and NH hashing algorithm.
E-series, Z-Series
Syntax
hash-algorithm seed value [linecard slot] [port-set number]
Parameters
seed value Enter the keyword seed followed by the seed value. The range is 0 to
4095.
linecard slot Enter the keyword linecard followed by the linecard slot number.
port-set number Enter the keyword port-set followed by the linecard port-pipe
number.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on Z9000.
Version 8.3.1.0 Introduced on the E-Series.
614