route-map
map-
name
(OPTIONAL) Enter the keywords route-map followed by the name
of the route map.
tag
tag-value
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is 0 to 4294967295.
Defaults none
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.3 Added Route Map for BGP Redistribution to OSPF.
Version 7.8.1.0 Added support for Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 Added the keyword default.
pre-Version
6.1.1.1
Introduced on the E-Series.
redistribute isis
Redistribute IS-IS routing information throughout the OSPF instance.
C-Series, E-Series, Z-Series, S4810
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric
metric-value | metric-type type-value] [route-map map-name]
[tag tag-value]
To disable redistribution, use the no redistribute isis [tag] [level-1 |
level-1-2 | level-2] [metric metric-value | metric-type type-
value] [route-map map-name] [tag tag-value] command.
Parameters
tag
(OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS
Level-1 routes.
level-1-2 (OPTIONAL) Enter the keywords level-1-2 to redistribute both IS-
IS Level-1 and Level-2 routes.
level-2 (OPTIONAL) Enter the keywords level-2 to redistribute only IS-IS
Level-2 routes.
metric
metric-
value
(OPTIONAL) Enter the keyword metric followed by a number. The
range is 0 (zero) to 4294967295.
metric-type
type-
value
(OPTIONAL) Enter the keywords metric-type followed by one of
the following:
1069
To Next Page
Loading...
